非典型周期和气候突变的识别与判定          下载免费PDF全文

秦建国 《水文》2020,40(1):23-28

通过两种新方法分析了无锡站降水年际变化的突变性、周期性等特征,揭示了旱涝演化的自然规律。研究表明,1934、1978、2013年是我国近现代气候突变的临界点,这是旱涝演化的自然选择;无锡站年际降水的观测历史可分成四个特征不同的时段,每个时段节点对应的都是一次气候突变;气候突变会改变年际降水序列的一致性,分段法研究可以大幅度降低模拟难度、提高预测效率。发现并确认了3个气候突变点,实现了超长缺测中断期(13a)旱涝趋势的精确插补,完成了无锡站近百年降雨序列的周期性分析与旱涝趋势预测模拟,研究成果改变了近现代气候历史无法细分的现状。  相似文献   

不同顶管组合方式的管幕冻结温度场模型试验   总被引：1，自引：1，他引：0  

段寅  荣传新  程桦  蔡海兵  解德柱  丁杨龙 《冰川冻土》2020,42(2):479-490

拱北隧道作为港珠澳大桥珠海连接线的关键性工程， 在国内外首次成功运用了管幕冻结技术。以此为背景， 为更加全面地掌握饱和软土地层中管幕冻结温度场的分布特点， 开展了不同顶管组合方式下的管幕冻结温度场模型试验研究。试验结果表明： 各测点温度曲线在积极冻结期前4 h急剧下降， 随后逐渐减缓， 降至砂土冰点后趋于平稳， 三种布管方式均满足冻结设计要求； 冻结管中低温盐水提供的冷量首先传递给顶管管壁， 再以“面”的形式均匀地传递给周围土体； 积极冻结21 h后， 采用四根空顶管组合的C区冻结壁竖向范围最大， 空管管壁正上方冻结壁平均厚度约为105 mm， 在满足管幕刚度设计要求的前提下， 可采此布管方式以达到快速形成冻结帷幕的目的。限位管开启后的4 h内， 实顶管中线垂直距离100 mm范围内测点温度曲线虽有明显回升但仍维持在冻土冰点以下， 超出此范围后温度变化影响逐渐减弱， 且顶管间冻结壁稳定存在， 表明限位管在满足管间有效封水的条件下， 能在一定范围内起到定向限制地层冻胀的作用。优化后的双圆形冻结管在满足冻结设计要求的同时， 更加便于安装且经济环保。  相似文献   

青州市表层土壤元素地球化学组合特征研究   总被引：1，自引：0，他引：1       下载免费PDF全文

姜冰  刘阳  颜丙鹏 《山东国土资源》2018,34(9)

聚类分析和因子分析可以获得土壤元素地球化学组合特征及其差异性。对青州市表层土壤样品数据进行分析研究,通过聚类分析,绘制表层土壤元素聚类谱系图,将23种元素或指标分为5个元素组合簇群及2个单元素簇,研究各元素间的组合特征,探讨其相关性、聚集性及其指示意义;通过因子分析,找出有代表性的因子,用其代表变量,绘制典型因子得分等值线图,并从中分析不同元素组合的区域分布基于何种因素,用11个代表性因子的分布特征就基本可以代表青州市表层土壤23项原始变量的分布特征,并对F1,F2,F3主因子进行了地质解释。聚类分析与因子分析相结合,利于表层土壤中元素的共生组合特征及其差异性研究,利于对研究区表层土壤异常进行归纳总结。  相似文献   

A New Wavelet Method for Identification of Eddies and Assessment of Incidents on Islands of the Eastern Caribbean     

Jason D. Tambie  Madiha Farag-Miller  Keith Miller  Bheshem Ramlal  Michael Sutherland 《Marine Geodesy》2019,42(3):227-245

Using two dimensional continuous wavelet transforms, a novel method for identification of mesoscale eddies is presented to facilitate extraction of characteristics for area, amplitude, type, and location from maps of sea level anomalies. In comparison with the previously established growing method for eddy identification, it is found that the wavelet method identifies more than twice the number of eddies and is particularly better at resolving small eddies down to the 0.25 degree resolution of the data. Such research into eddy identification and tracking is significant to the assessment of eddies with potential to impact on coastlines of small islands. The method is applied to the identification of eddies on tracks towards islands of the Eastern Caribbean over 23?years. Spatial and temporal variation in rate of occurrence and magnitude is established. For Barbados there is an average of 9 anticyclonic incidents a year with maximum amplitude of typically 0.22?m in the dry seasons and 0.16?m in the wet seasons. Seasonal variation is reversed for the other islands with twice the number of anticyclonic incidents having maximum amplitudes of about 0.20?m annually.  相似文献   

复杂地形景区三维导览图的设计与实现     

吴思锴  李百寿  郭家豪  李雪  张卫平 《北京测绘》2020,(1):38-43

为满足复杂地形景区对三维地图导览的需求,构建更为清晰的三维地图模型,提供良好的三维导览地图设计方案显得尤为重要。为了更好地与卫星影像进行贴合,DEM数据的采样密度要与卫星影像的分辨率一致。本文通过对比当下常用的四种空间插值方法的适用范围与运用特点,设置相关阈值及权重,直观比较了四种插值方法产生的插值结果,选择更适合复杂景区DEM插值的插值方法并对其进行精度提升,以此得到符合精度要求的DEM数据。最后利用相应地区的卫星影像进行地图投影及影像贴图,两种数据结合构建复杂景区的三维地图模型,给游客带来更为精确直观的定位信息和空间要素信息。  相似文献   

Fully coupled elastoplastic hydro-mechanical analysis of unsaturated porous media using a meshfree method     

Omid Ghaffaripour  Golnaz A. Esgandani  Arman Khoshghalb  Babak Shahbodaghkhan 《国际地质力学数值与分析法杂志》2019,43(11):1919-1955

This paper presents the first application of an advanced meshfree method, ie, the edge-based smoothed point interpolation method (ESPIM), in simulation of the coupled hydro-mechanical behaviour of unsaturated porous media. In the proposed technique, the problem domain is spatially discretised using a triangular background mesh, and the polynomial point interpolation method combined with a simple node selection scheme is adopted for creating nodal shape functions. Smoothing domains are formed on top of the background mesh, and a constant smoothed strain, created by applying the smoothing operation over the smoothing domains, is assigned to each smoothing domain. The deformation and flow models are developed based on the equilibrium equation of the mixture, and linear momentum and mass balance equations of the fluid phases, respectively. The effective stress approach is followed to account for the coupling between the flow and deformation models. Further coupling among the phases is captured through a hysteretic soil water retention model that evolves with changes in void ratio. An advanced elastoplastic constitutive model within the context of the bounding surface plasticity theory is employed for predicting the nonlinear behaviour of soil skeleton. Time discretisation is performed by adopting a three-point discretisation method with growing time steps to avoid temporal instabilities. A modified Newton-Raphson framework is designed for dealing with nonlinearities of the discretised system of equations. The performance of the numerical model is examined through a number of numerical examples. The state-of-the-art computational scheme developed is useful for simulation of geotechnical engineering problems involving unsaturated soils.  相似文献   

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests     

Hua-Xiang Zhu  Zhen-Yu Yin  Qiang Zhang 《国际地质力学数值与分析法杂志》2020,44(3):389-404

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.  相似文献   

自然重砂成因矿物学特征及找矿指示作用     

董国臣  李胜荣  申俊峰  董朋生  李华伟  殷国栋  汤家辉 《地学前缘》2020,27(5):171-178

自然重砂是地质体经自然风化、剥蚀、搬运、沉积等地质作用而分离出的单矿物(或矿物组合)。自然重砂矿物晶体由于仍然保留有许多矿物成因信息,包括颜色、形态、化学成分、物理性质和矿物组合等特征,因此常用于追溯源区地质体或者找矿勘查。这种方法被认为是一种经济实用的找矿方法——自然重砂测量。本文基于全国自然重砂找矿的数据资料,系统梳理了自然重砂的矿物类型、出现频率及其分布等特点,分析了自然重砂的矿物组合和成因矿物学特征,研究了自然重砂矿物的源区烙印、搬运距离及标型指示矿物组合特征,探讨了自然重砂成因矿物学研究意义及其找矿应用前景。自然重砂矿物的颜色、形态及内部结构依然保留着明确的成因矿物学信息:其颜色和晶体形态具有继承性而与其源区母体联系起来,体现源区母体的特性;其矿物组成可分出残余原生重矿物(包括造岩矿物、副矿物、矿石矿物等)和新生重砂矿物两个部分,如赤铜矿、孔雀石等反映着源区岩性体的成分或者赋存状态特征,其矿物组合也在很大程度上继承原生共生矿物而体现诸如有无矿化等意义;重砂颗粒的磨圆度、边界光滑性等表面特征反映搬运距离,有利于明确响应源区母体或者物源,而具有良好的找矿指示意义。  相似文献   

微量元素分析在判别沉积环境中的应用——以柴达木盆地西部锶矿区富锶地层为例          下载免费PDF全文

年秀清  韩凤清  韩继龙  毛庆飞  马喆 《盐湖研究》2019,27(1):66-72

沉积岩中的微量元素对沉积环境水介质的变化较为敏感,是研究沉积物沉积时古气候、古环境的有效手段。选取了对沉积环境介质较为敏感的锶(Sr)、钡(Ba)、铜(Cu)、铀(U)、钒(V)、镍(Ni)、钍(Th)等元素作为判别指标,对柴达木盆地西部上新统油砂山组、狮子沟组和更新统七个泉组三套富锶岩层的古气候和古沉积环境特征进行了研究。结果表明,柴达木盆地西部从油砂山组到七个泉组沉积时总体上为干旱的气候环境;湖盆水体的盐度较高,表现为咸水环境,且从油砂山组到七个泉组随着地层变新,盐度有逐渐增大的趋势;油砂山组、狮子沟组和七个泉组沉积时湖盆水体均表现为中等分层、湖水循环较为顺畅的氧化环境。  相似文献   

Revisiting the existence of an effective stress for wet granular soils with micromechanics          下载免费PDF全文

Jérôme Duriez  Richard Wan  Mehdi Pouragha  Félix Darve 《国际地质力学数值与分析法杂志》2018,42(8):959-978

A possible effective stress variable for wet granular materials is numerically investigated based on an adapted discrete element method (DEM) model for an ideal three‐phase system. The DEM simulations consider granular materials made of nearly monodisperse spherical particles, in the pendular regime with the pore fluid mixture consisting of distinct water menisci bridging particle pairs. The contact force‐related stress contribution to the total stresses is isolated and tested as the effective stress candidate for dense or loose systems. It is first recalled that this contact stress tensor is indeed an adequate effective stress that describes stress limit states of wet samples with the same Mohr‐Coulomb criterion associated with their dry counterparts. As for constitutive relationships, it is demonstrated that the contact stress tensor used in conjunction with dry constitutive relations does describe the strains of wet samples during an initial strain regime but not beyond. Outside this so‐called quasi‐static strain regime, whose extent is much greater for dense than loose materials, dramatic changes in the contact network prevent macroscale contact stress‐strain relationships to apply in the same manner to dry and unsaturated conditions. The presented numerical results also reveal unexpected constitutive bifurcations for the loose material, related to stick‐slip macrobehavior.  相似文献